About the introduction of construction methods of thermal insulation tiles

1, we must first understand the arc of the tile, lap when placed in a small arc on the side of the arc below, in order to row tile, tile tile direction from right to left, on the right side of the arc;

2, check. To conduct a series of checks on the insulation tile, to ensure that the insulation tile is intact to carry out the installation.

3, punch. In the second and fourth arcs at the peak drilling, and other directions to stop drilling; first to expand, in order to prevent the use of products in the process of normal thermal expansion and contraction caused by cracking phenomenon, the hole diameter larger than the private 2- 3mm is appropriate.

4, fixed. Use a special nail to fix the tile, use a special wrench to adjust the degree of tightness, to ensure that the elastic fit, because too loose will leak, too tight will tile body in the normal deformation cracking.

5, in order to ensure waterproofing, construction safety and aesthetic appearance of the roof, the roof slope of not less than 1/10 (otherwise lap joints need to do special waterproofing), lap length of not less than 200mm; Tan do not be greater than the distance 1500mm.

6, in the process of installation, to stop the tossing of insulated tiles to work, to use rope or other things for delivery, to ensure the safety of staff. At the same time, it is also required to set up a guard zone for the proposed area and organize the supervision of special personnel to ensure the safety of pedestrians crossing the road.

7, the device is attributed to the high-altitude operation of insulated tiles, so when the device insulation tiles, workers need to pay attention to safety. For example, it is necessary to choose a safe and secure seat belt, and the seat belt set in a solid place, to ensure their own safety. Staff suffering from high blood pressure, not suitable for high-altitude operations, it can not be insulated tile device.